Nannycraft4u

Make your handmade dreams a reality - Just ask Nanny!

Home » Let’s Sew 16 – Embroidery 1 – Preparation

Let’s Sew 16 – Embroidery 1 – Preparation

by 5 Comments

Print Friendly, PDF & Email

Today we are starting a little series on basic hand embroidery .  I do not claim to be an expert embroiderer, but I do enjoy being able to add that element to my projects. You too will be able to use these skills as you embellish your sewing projects. 
 
Many have been left with unpleasant memories of ‘school sewing’ and avoid hand stitching but Nanny will show you how easy it really is!
The first thing in our series will be to look at the equipment and then at some basic ‘getting ready to embroider’ tips.
1.Thread or embroidery floss:

How to purchase Embroidery Thread or Floss.
 
When I mention embroidery thread (sometimes called floss), I am referring to the 6 stranded thread that comes in a skein.  It is held together by two paper labels.

 The top label shows the number 25 – this tells you it is the six stranded thread

The bottom label also has a number and this is the colour number.

2. Needles
Embroidery needles are also called Crewel needles.  They have a larger eye necessary to thread the strands of embroidery floss/thread.

 How to store your embroidery floss/thread:

You can purchase these cardboard cards (or make your own)

Remove the paper wrappers from each end of the skein

Write the colour number on your card

Open the loop of thread, making sure that all loops are open.  You will see down at the bottom that some of mine are still not opened yet
– I will fix these before I go on.

Tuck end of thread into slit in card

Wind thread onto card, spreading along the card and back

When finished, tuck end into other slit in card

Pop into your container (and watch your collection grow!)

How long to cut your threads for embroidery
 
Once again this will vary with personal preference, how large the section to be embroidered is etc.  A good length is about 12″ (30cm)- 15″ (39cm).  You will find this manageable and so less likely to end up in knots!
How to Separate the Strands of Embroidery Floss/Thread
 
When you embroider you may use a different number of strands of thread.  The number will be determined by the effect you want it to have. I  generally  use 2 or 3 strands.
People have many interesting ways of separating the strands – all designed to avoid knotting! This is a simple technique for you – it works for me!
Take the end of the thread and separate the strands – you should see 6!

Hold the thread so it lies along in your hand,close your fingers around the thread and grip it firmly  Pull the strands you selected and you will notice it start to bunch up at the bottom of your hand.  That is OK!!
Keep pulling until your strands are free BUT don’t let the thread in your hand  go.  You will end up with a big bunch.
Take the ends showing at the bottom of your hand and, while still holding your hand firm,  pull the thread out straight again.  Wasn’t that simple!

Now find a design you like so we can start stitching!
Until next time
Nanny xx

Comments

  2. Anwar | Embroidery Digitizing Service says

    This thread seems very nice for embroidery. Mainly the quality of an embroidery design is from the thread too. So, we must need to look at the thread we are using. And It’s a really good idea to use a number on them. So we can use this same thing for next design if requires.

    Reply

Trackbacks

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

This site uses Akismet to reduce spam. Learn how your comment data is processed.

© Nannycraft4u

All content and images belong to Nannycraft4u unless otherwise indicated. You are welcome to link back to my blog, but you may not copy whole posts, tutorials or photos without my permission. Please give credit for my work and link back to the original post at Nannycraft4u.com If you use one of my ideas, I would love to know about it. Designs and tutorials are for personal use only.