• HOME
  • ABOUT
  • BLOG
  • CONTACT
  • FEATURES
  • PARTIES I LINK TO

Nannycraft4u

Make your handmade dreams a reality - Just ask Nanny!

  • CHARITY PROJECTS
  • TUTORIALS
    • BAGS,POUCHES,ROLLS,WALLETS
    • EMBROIDERY
    • HOME/DECOR
    • LET’S SEW
    • QUILTING TUTORIALS
    • SPIN THE PINS
    • TOYS
    • WOTZA WEDNESDAY
  • SEWING/QUILTING
    • SIMPLE PROJECTS
    • TIPS & TOOLS
  • RECIPES
  • NANNY CHAT
  • NANNY & POPPY PROJECTS
    • CRAFT ROOM
    • HOUSE
    • TRAVEL
Home » hexagons

Spin the Pins – Make a Hexie Bag

August 3, 2015 by Nanny 14 Comments

 

Spin the pins

 

Hexie Bag

As you would now be aware, I co-ordinate fabric swaps for Australian residents through my Facebook page ‘Nannyswapz’.  

When planning a swap with hexies, I try to find a project by spinning the pins so that participants have a purpose in mind before the swap proceeds. On my Hexies board I found a hexie bag that used 16 hexagons and so built our swap around that.  We  swapped Rainbow Batik hexies and I am going to use them to make  my hexie bag.  So here is my Spin the Pins – Make a Hexie Bag!

DSC05767

I decided that rather than sewing the bag and then lining it, I would hand stitch each hexie and then join them.  I also decided to make my own version re the shape and so made another 4 hexies to give me a total of 20.

What you need:

20 x 2.5″ (side) hexagons  ( Hexie Bag Templates)

20 x 2.5″ (side) hexagons of Vilene

20 x   hexagons      (Hexie Bag Templates

Matching thread

Finished size:  Approx 15″ x 13″ at the centre and 9″ at the sides plus handle

Let’s Sew!

1.  Iron the vilene to the back of the hexies

2.  I then machined around the outer edges

3. Centre that hexie , wrong side to wrong side on one of the larger hexies.  I used a large needle through the centre to hold them together.

DSC05738

4.  Fold the edge of the large hexie into the edge of the smaller hexie and finger press.

DSC05739

5.  Fold over again and pin

DSC05740

6.  Take a threaded needle and knot the end.  Concealing the knot, start stitching about 1″ from the corner (or from my finger in the photo) and stitch to about where the stitching line will be on the next side.

7.  Fold the next side the same way, making sure that the corner forms nicely.

DSC05787

8. Continue in this way until you are all the way around.  Finish off and slip the needle through the border to finish.

9.  Complete all 20 hexies in the same manner.

DSC05765

10.  Play around with the hexies  until you are happy with the setting out of  2 flower shapes (the front and back of the bag)

DSC05785

 

 

DSC05766

 

11.  Take the centre hexie and one other.

DSC05781

12.  With right sides together, stitch along one edge. (I used a whip stitch)

DSC05783

 

13.  Take the next hexie (yellow) and join the edge to the centre hexie (aqua)

DSC05782

14.  Continue joining all of the hexies to the centre and then join along the adjoining sides to complete the ‘flower

15.  Repeat with the other ‘flower’

16.  Now from the other 6 hexies, choose two to go on the end of the flowers:

Here

DSC05788

 

and here

DSC05789

17.  Take the 4 and stitch the pairs together

DSC05790

 

and then join them to the ‘flowers’

Like this:

DSC05792

 

 

and this:

DSC05793

 

18.  Now join the two ‘flowers’

DSC05791

 

and the complete the ‘circle’ by joining here

DSC05795

 

 

19.  Now you get to make a choice – how do you want your bag to be finished?

With the handle coming from the centre? (from the yellow)  If so, you will add the other two hexagons as shown.

DSC05796

 

On the other hand, you may prefer your bag handles to come from the sides like this.  If so you will add the extra two hexagons as shown.

DSC05797

 

I am making my bag for a specific reason ie to hang on the arm rest in the motorhome to hold my knitting, (It really is time for that shopping bag to go), and so

I have decided to have my handle come from the centre of the bag. This will ensure that it hangs ‘flat’ and not protrude into the walkway.

One side

DSC05800

and the other

DSC05799

20.  To make your handle, you will cut a strip 3″” x  twice the length you want it to be plus 0.5″.  I measured mine and will make it 16″. This will also be a good length to hang over my arm when taking it outside to crafting sessions.

DSC05801

 

21.  Cut a piece of vilene 2.5″ x the length of your handle and iron it onto the wrong side

DSC05815

22.  With right sides together, sew around the edges leaving a space to turn it through. Clip corners.

DSC05816

 

23.  Turn to right side, roll seams between your fingers and thumbs and press.  Stitch around the edge 1/4″ from the edge and then some rows of stitching the length of the handle.

DSC05817

24.  Join handle to the bag. I’m using whip stitch again.  You could, of course, stitch it to the top hexie using your machine if you prefer.

DSC05818

 

Now to load it up with my knitting needle roll,  a pair of snips, a needle size gauge and a darning needle and my current project – all that I need, exactly where I need it!

DSC05819

 

Perfect!!  Start the engines PJ – Nanny is ready to hit the road.

DSC05821

 

 

 

 

Until next time

Nanny xx

 

 

 

 

 

 

 

 

 

 

Please share:

  • Click to share on Facebook (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)

Filed Under: BAGS,POUCHES,ROLLS,WALLETS, NANNY CHAT, QUILTING TUTORIALS, SIMPLE PROJECTS, TRAVEL Tagged With: handstitching, Hexagon bag, hexagons, nannycraft4u

Spin the Pins – Make a Hexie Pouch

April 11, 2015 by Nanny 6 Comments

 

Spin the pins

In my swap group (Australia only) we decided to try swapping some hexagons, so with a quick spin of my pins, I found this cute little pouch made using 1″ hexagons and decided that I would make a Hexie Pouch!

This is how I did it:

I collected my hexies from the swap, cut some papers on my newly acquired Accuquilt Go and started basting.

Hexie pouch1

In no time at all I had them done and had fun ‘playing with positions’

DSC05363

 

Following the diagram given, I arranged my hexies and started joining them with a whip stitch.

hexie pouch2

As I used paper templates and not wadding/stiffening, I needed to use my hexie shape to cut out a layer of Vilene.

hexiepouch9

I then removed all of my papers and popped them away for next time.

hexiepouch4

Next I opened the edges not stitched and pressed them open.

hexiepouch7

I then cut a lining to match the opened shape and pressed the vilene to the back of the hexie shape.

hexiepouch10

Then it was off to the machine where I stitched around the edge leaving a space to turn it through.

DSC05451

I then clipped the corners and turned it through to the right side.

DSC05452

Time to stitch the opening closed.  I use ladder stitch to do this.

I then  pressed it well and using ladder stitch, joined it up to form the pouch.  I added a snap press for closure.

DSC05454

How cute is that!!  Thank you Maria-Cecelia-Mora, I love your little pouch and I love mine too!

DSC05453

 

Now to decide what to make with our next Hexie Swap………

Until next time

Nanny xx

Please share:

  • Click to share on Facebook (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)

Filed Under: SIMPLE PROJECTS, SPIN THE PINS Tagged With: hand sewing, hexagons, hexies, pouch

Welcome!

Welcome! I am Nanny and this is where I like to share my crafting as well as other snippets of our life in Australia. Read more

Social

Follow me on:

Like a Newsletter?

My Button4u

grab button for Nannycraft4u
<div class="nannycraft4u-button" style="width: 150px; margin: 0 auto;"> <a href="http://www.nannycraft4u.com.au" rel="nofollow"> <img src="http://i1168.photobucket.com/albums/r482/Nannycraft4u/logo8-001.jpg" alt="Nannycraft4u" width="150" height="150" /> </a> </div>

Looking for something?

Australian Women Bloggers Directory by Blog Chicks

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Follow on Facebook

Follow on Facebook

Favourites

  • Spin The Pins - Microwave Bowl Holder
    Spin The Pins - Microwave Bowl Holder
  • Let's Sew Part 2 - Threading Your Machine
    Let's Sew Part 2 - Threading Your Machine
  • TUTORIAL - Slow Cooker Lid Cover
    TUTORIAL - Slow Cooker Lid Cover
Follow on Instagram

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

© Nannycraft4u

All content and images belong to Nannycraft4u unless otherwise indicated. You are welcome to link back to my blog, but you may not copy whole posts, tutorials or photos without my permission. Please give credit for my work and link back to the original post at Nannycraft4u.com If you use one of my ideas, I would love to know about it. Designs and tutorials are for personal use only.

Copyright © 2023 · Lifestyle Pro Theme on Genesis Framework · WordPress · Log in